LayBrick Sandstone Filament – 1.75 mm – 250g

Printed objects can also be colored and easely grinded.

• For architecture models / landscapes
• No plastic feeling
• Printed objects can be coloured and easely grinded
• Stics well on print bed,
• No heated bed necessary
• Contains natural mineralic fillers (super-fine milled chalk) and harmless co-polyesters
• A new Filament – for huge objects / architecture models
• (use the entire space of your jumbo printer)
• Size of the object in video: 30 x 20 x 2 cm 11.8 x 7.9 x 0.8 inch
• Very rough surface, near sandstone
• Ideal for jumboprinters
• Near zero warp !!!

Recommended print settings:

• Print temp: 165°C to 210°C, smooth to rough surface, 165°C less to 210°C more oozing
• You may print layer-thickness from 0.1 mm to 0.5 mm
• Slicing: object fill max. 25%, fan needs to be on
• It´s recommended to print in rooms with min. 20° Celsius. Colder more brittle
• If you print with code M227 // values f.e. S:30000 P 10000
• Wait after printing until object is hardened, then remove it from platform
• Temperature stabil to about 70° Celsius

Beta version:Means that the grey colour of the filament may change in nuances, the filament is also a little maiden, it may brake while bending, you should be sure (especially during a long print) that you can feed a broken part of filament again in your printer.Package:250 grams of 1.75mm LayBrick Filament