{"id":6658,"date":"2020-12-17T09:02:07","date_gmt":"2020-12-17T07:02:07","guid":{"rendered":"https:\/\/thes3d.sergiodk5.com\/shop\/addnorth-textura-1-75mm-750g-matte-white\/"},"modified":"2021-04-11T21:07:54","modified_gmt":"2021-04-11T18:07:54","slug":"addnorth-textura-1-75mm-750g-matte-white","status":"publish","type":"product","link":"https:\/\/thes3d.sergiodk5.com\/en\/shop\/addnorth-textura-1-75mm-750g-matte-white\/","title":{"rendered":"ADD:NORTH Textura\u2122 – 1.75mm – 750g – Matte White"},"content":{"rendered":"

Specifications:<\/strong><\/p>\n

\n
Diameter tolerance: \u00b10.025mm<\/div>\n<\/div>\n
\n
Spool size:\u00a0200 x 52 x 55 mm (500 – 1000 g)
\nWeight filament: 750g<\/div>\n<\/div>\n
\n
Weight empty spool: 215 g (500 – 1000 g)<\/div>\n<\/div>\n
\n
Density: 1.24-1.27<\/div>\n<\/div>\n
\n
Working temperature: 60\u00b0C<\/div>\n<\/div>\n
\n
Wear resistance: Medium<\/div>\n<\/div>\n
\n
Chemical resistance: Medium<\/div>\n<\/div>\n
\n
Bed temperature: 60 \u00b0C<\/div>\n<\/div>\n
\n
UV resistance: High<\/div>\n<\/div>\n
\n
Hygroscopy: Medium<\/div>\n<\/div>\n
\n
FDA: Yes<\/div>\n<\/div>\n
\n
Biodegradable: Yes<\/div>\n<\/div>\n
\n
ROHS: Yes<\/div>\n<\/div>\n
\n
REACH: Yes<\/div>\n<\/div>\n
\n
FSC: Yes<\/div>\n<\/div>\n
\n
Natural fibers: Yes<\/div>\n<\/div>\n
\n
Print temperature: 185-210 \u00b0C<\/div>\n<\/div>\n
\n
Biobased: Yes<\/div>\n<\/div>\n
<\/div>\n
\n

Temperatures and cooling<\/b><\/p>\n

Since this material is based on PLA, only minor changes are required from the standard settings for PLA. The temperature and the fan can be varied depending on if strong layer adhesion or ease-to-post-process i preferred. For good layer adhesion, print at around 205\u00b0C and use not more than 20-30% fan. If ease-to-post-process is preferred, print at 190\u00b0C and 80-100% fan.<\/p>\n

<\/i>Build plate adhesion<\/b><\/p>\n

The build plate temp should be as with normal PLA, none or up to 65\u00b0C depending on your surface. PEI or BuildTak is recommended<\/p>\n

<\/i>Quality<\/b><\/p>\n

Quality is a complex area where hardware and slicer have big impact. Every new filament needs in general some tuning to achieve its full potential, usually through printing some calibration models and adjusting iteratively. We have gathered our favourites\u00a0here<\/a>. To troubleshoot specific issues, we would like to refer you to our\u00a0material guide<\/a>\u00a0\u2013 here are some general quality tips though:<\/p>\n