There\u00b4s many benefi ts by using metal powder. You will experience a real \u201cmetal feel\u201d when you touch it and it also have that \u201ccold\u201d feeling that you can have when you touch copper or bronze. When it comes to weight SELECT Bronze\/Copper is about 3-4 times heavier than regular PLA which also enhances the feeling of real metal. Thanks to the metal powder there\u00b4s also very low shrinkage when printing with this filament<\/p>\n
You can use SELCT Bronze\/Copper in almost any FDM printer on the market today and the filament has been tested in a number of different set ups with both Bowden and direct drive printers. Due to the abrasive nature of metal we recommend that you use a hardened steel nozzle* with this filament. It prints great with a regular brass nozzle also but the wear and tear is bigger and the risk for wearing out your nozzle increases.<\/p>\n
Why should I use PrimaSELECT\u2122 Metal?
\n<\/b>\u2022 Easy to print
\n\u2022 Contains 80% real metal for a genuine look and feel
\n\u2022 Works on most 3d-printers
\n\u2022 PLA based
\n\u2022 Easy to polish and post process
\n\u2022 Can print with retraction<\/p>\n","protected":false},"excerpt":{"rendered":"
PrimaSELECT Metal<\/strong> is a new exciting type of filament which let you take 3D-printing to a new level. In this new material we have introduced a filament that contains 80% metal powder! Needless to say, this material is as close to real metal as you can come in the filament industry for FDM\/FFF printers. PrimaSELECT Metal<\/strong>\u00a0is available in Bronze and Copper.<\/p>\n