Technical specifications
| Description | ASTM Method |
|---|---|
| Appearance | Clear liquid |
| Odour | ether-like |
| Viscosity | 3,6 – 3,8 mps at 25°C |
| Density | 0.95 g/cm² |
| Boiling point | >180°C |
| Freezing point | <-70°C |
DOWNLOAD USER GUIDE
Resin cleaning compatibility
Liqcreate Resin Cleaner is an excellent, effective non-toxic post-print cleaning solution for 3D printing and an excellent IPA or bio ethanol substitute. Liqcreate Resin Cleaner is not a dangerous good, non-flammable and has no unpleasant odor. The cleaning liquid can clean SLA, DLP and LCD printed objects, platforms, instruments and surfaces. It can be used with ultrasonic cleaners and the liquid can be used several times without refilling or filtering the Liqcreate Resin Cleaner. Liqcreate Resin Cleaner is compatible with Liqcreate resins and many other 3D printing resins, developed for SLA, DLP and LCD 3D printers with a 385 – 420 nm light source.
Advice when using Liqcreate Resin Cleaner
Do not dilute Liqcreate Resin Cleaner with water. For best results, pre-wash in a separate container (ultrasonic bath) to remove excess resin. In case of skin contact: wash off with soap and water. Keep out of reach of children. Do not eat, drink or smoke when using this product. Do not let (resin contaminated) product enter drains. Store below 30°C in closed container. Due to the high boiling point of Liqcreate Resin Cleaner, the cleaner won’t evaporate from surfaces like ethanol or IPA.
