LayFilaments Laywood-Flex – 2.85mm – 0.25kg

His latest fiddling has given the added property of flexibility to his wood filament, Laywoo-D3. Laywood -Flex brings the bendability of tree branches to 3D printable filament, without being rubber-like.

Laywood prints are otherwise quite rigid with high tensile strength and tend to break faster, but Laywood-Flex has a higher elasticity with slightly lower tensile strength.

You can see the FLEX filament in the clip above. In a nutshell, LAYWOOD has a higher tensile strength, but will break under enough pressure. LAYWOOD-FLEX, meanwhile, has a lower tensile strength, but has a far higher degree of elasticity. Perfect for 3D printing belts, imitations of wooden decorations or even small pieces of furniture (and whatever else your making mind comes up with).

• No (or minimal) warping
• Rough or smooth surfaces that can be sanded
• 3D printable tree-rings (185 to 255°C) are possible, depending on temperature and printing speeds. Elasticity will be higher on darker layers.
• Sticks well to ABS-paint on cold platforms or blue tape.
• Print directly on capton-tape with a 50°C platform .
• Contains ~ 35 % recycled wood, as well as harmless binders made by co-polyesters.
• Nozzle: 0.5 mm.